Uncategorized

What is a Prefix?

A prefix refers to a group of letters placed in front of a (base) word, which ends up changing the meaning of the word. Common prefixes include pre-, pro-, dis-, de-. On their own, prefixes have specific meanings. For example, dis- means “opposite.”

Prefixes can indicate position, show repetition, or make a word negative. Some of the most common prefixes that make words negative include un-, in-, and dis-. For example, adding the prefix un- to the word successful creates the word unsuccessful, which means not successful. Another common prefix is re- that indicates repetition. For instance, adding re- to the word construct creates the word reconstruct (to construct again). Common prefixes that can indicate position include sub- (means below or under) and supra- (means above). For example, sub is found in common words like submarine and subway.

There’re several rules that students need to consider when adding a prefix to a word. When adding a prefix, they shouldn’t change the spelling of the prefix or the original word. For example, the words unhappy (a combination un- and happy), undo, and disappear all demonstrate this guideline. Students should follow this rule even if the spelling leads to double consonants, such as in the words cooperation and misspell.

Students need to be careful to notice the prefix look-alikes. Some words comprise the same string of letters of a prefix, but they aren’t prefixes. For example, the re in real isn’t a prefix.

There’re several cases where students need to use a hyphen with prefixes. A hyphen needs to be used when adding a prefix to a numeral or a proper noun (e.g., pre-1990 and un-American). Students need to use a hyphen when adding the prefix ex only when it means former (e.g., ex-president). If ex means away from or out of, the use of a hyphen will lead to misreading (e.g., in expel). Hyphens also help to prevent confusion with other words. For example, students need to hyphenate re-cover (to cover again) to prevent confusing it with recover (to repair or regain). A hyphen should always be used after the prefix self- (as in self-respect). Students should hyphenate to separate two “I”s, two “A”s, or other letter combinations that may cause mispronunciation or misreading (e.g., anti-intellectual, ultra-ambitious, and co-worker). They may also use a hyphen to separate two “O’s or two “E”s to prevent mispronunciation or improve readability (e.g., co-opt vs. coordinate and de-emphasize vs. reenter).

R-Controlled Vowels: Everything You Need to Know

These are specific vowels that an “r” follows and end up being influenced or controlled by the r. There are five notable vowel combinations that are controlled by an r. they are: or, ir, ur, er, and ar. R-controlled vowels are frequently called the “Bossy R” because the r makes the vowel form a new sound.

R-controlled vowels can be a challenge for children to spell and sound out. However, it’s important for students to learn about r-controlled sounds and be able to identify them so they can spell and read more complex words. Often, learners who haven’t mastered r-controlled vowels misspell and mispronounce these words. For instance, if a child were to read the word cord, they might read the o as a short o sound while separating it from the r sound. This will make the word sound like card rather than cord. Additionally, when spelling the word cord, they might try to add a vowel team or a silent e to create a long o sound, such as coard or cored. Once children have learned and mastered this important phonics skill, they should be able to correctly read and write the majority of r-controlled vowels.

When teaching r-controlled vowels, teachers should follow systematic phonics instruction. They should start with ar and or because they don’t sound the same, and hence, are easier for students to learn. Teachers can introduce er/ir/ur together because they all make the same sound. The use of a compare and contrast strategy can be helpful to teach r-controlled vowels. Teachers can ask students to read CVC words comprising short “a” (e.g., cat, cap, and can). Then they can tell the learners that the consonant “r” alters the sound of the vowel before it and read out the word “car.” The process can be repeated with other CVC words. Teachers can also have the learners read “had” first and then replace the “a” with “ar” and read out “hard.”

Phonics posters, decodable texts, pictures, and word sorts, etc., can also be used to help students master r-controlled vowels. Once the learners can read “ar” words, teachers can move on to the spelling of those words. A common spelling mistake often done by beginning spellers is writing the letter “r” by itself for /ar/. This confusion is created by the letter name and sound. Teachers should explicitly tell learners that while the letter name for “r” is pronounced as “ar,” this isn’t the sound it represents.

What is a Schwa?

The term “Schwa” refers to the intonation in the English language, which is comparable to the short “u” sound /uh/. The schwa, however, is used in un-emphasized syllables.  In typical example words like another, away & again, you find the schwa sound at the beginning of the word. The schwa is usually indicated with an inverted letter e.

The word “schwa” comes from Hebrew, and it’s the most common vowel sound in the English language. The schwa appears almost once in every three vowel sounds made by a native English speaker. Any vowel letter can turn into the schwa sound. Only words that have two or more syllables might have a schwa, which is also known as the “mid-central vowel.” In an unstressed syllable, the schwa represents a mid-central vowel such as the second syllable in “buses” and in “woman.” One doesn’t need to spread the lips wide or round them to make it. Instead, the tongue, the jaw, and the lips remain relaxed when creating this vowel sound.

One can find the schwa in unstressed syllables of content words such as soldier, machine, and pursue. On these syllables, the spelling is any of e, a, and u, which makes it difficult to identify a schwa on spelling alone. Consider, for example, Orinda, which’s the name of a town in California, is pronounced /ər’in-də/. Here, the first vowel and the last vowel are reduced to schwa. Only the stressed vowel in the word, the second vowel, maintains its clarity.

The schwa sound can be omitted in some word endings comprising the sounds /l, m, n/ like little, fathom, or passion. Additionally, omitting a schwa tends to occur before /r/ in words such as history, dictionary, and camera.

Most multisyllabic words in the English language have weak syllables, where schwas are present. Teachers always ask their students to listen to the sound present in words when spelling them. But if students listen to the sounds in multisyllabic words, they’ll hear and spell the schwa sound. This is why kids commonly misrepresent the schwa vowel and spell “chikin” for “chicken” and “takin” for “taken.” Teachers need to encourage students to use their “spelling voice.” Therefore, for example, when spelling chicken, they will need to clearly say the syllable “/e/n/” as they spell the word. However, these misunderstandings usually disappear as a kid improves their knowledge of the English language and learns about conventional alternatives for representing sounds.

Short Vowels: Everything You Need to Know

This is basically a short-sounding vowel. Words in which short vowels are used do not sound as long as those words that comprise long vowels. In a bid to get short-sounding vowels, there is typically a single vowel in the word, trailed by one consonant or more. As with all other rules, there are exceptions, and a common example is the word “truth.”

When teaching students how to read and spell short vowels, teachers need to tell them about short vowel sound rules.

If there’s one vowel in a single syllable word, the vowel is usually short. The exception to the rule is a vowel that isn’t followed by a consonant. For example, the word “zip” has one syllable. The vowel “i” is followed by the consonant “p,” and hence, the “i” is short. If it isn’t followed by a consonant, such as “he” or “no,” the vowel is long.

If there’re two vowels in a single syllable word, the first vowel might become long. Other vowels in a word can make a vowel long instead of short. For example, the “o” in the word “hop” is short, but the “o” in “hope” is long.

When two consonants are following the vowel, even if another vowel follows them, the first one will be short. For example, the “i” in the word “riping” is long, while the “i” in the word “ripping” is short. The two consonants isolate the first vowel from the impact of the second vowel. The syllables of “riping” are isolated into “ri” and “ping.” The first vowel doesn’t have a consonant after it, which makes it long. The second word “ripping” can be split into “rip” and “ping.” Here, the “i” in the first syllable is followed by a consonant, which makes it short.

There’re several interesting ways to teach students short vowel sounds. Songs are one of the most effective ways to teach short vowel sounds, as their catchy rhythms help children easily learn and remember them. Teachers can also use simple gestures for each vowel. This can help children associate the vowels with the movements and the sounds they’re making. Additionally, teachers can place a mark on top of the short vowels. For example, a curved symbol can be used to indicate a short vowel sound (e.g., ‘ă’ in ‘măn’). This helps to reinforce a child’s ability to recognize and effectively use the proper vowel sound.

What is a Suffix?

A suffix refers to a group of letters placed at the end of a (base) word, which ends up changing the meaning of the word. Common suffixes include -or, -er, -ity, -ment. Sometimes suffixes also change the spelling of the original word. When adding a suffix, one may need to double the last letter. For instance, when adding the suffix -ed to the word “drop,” one also doubles the p, and it becomes “dropped.”

Some suffixes have particular uses. Adding “ed” can change the tense of a verb (e.g., “jump” to “jumped”), while adding “ing” can transform a noun into a verb (e.g., “garden” to “gardening”). The addition of the suffix –ly changes an adjective into an adverb (e.g., “decent” becomes “decently”). If the base word ends with “y,” the “y” turns into “i,” and then –ly is added to it (e.g., “happy” becomes “happily”). If a word ends with “le,” the “le” is dropped, and –ly is added (e.g., “horrible” becomes “horribly”).

The addition of the suffixation changes a verb into a noun (e.g., “inform” becomes “information”). If a word ends with “ve,” “ne,” or “re,” the “e” is dropped, and –ation is added (e.g., “prepare” becomes “preparation”).

The addition of the suffix –ous changes a noun into an adjective. The suffix –ous means “being full of a particular quality” or “having the quality of.” When –ous is added to a word that ends with “e,” the “e” is dropped (e.g., “adventure” becomes “adventurous”). When –ous is added to a word ending with “y,” the “y” is replaced with “i” (e.g., “fury” becomes “furious”). When –ous is added to a word ending in “our,” “our” becomes “or,” and then –ous is added (e.g., “humor” becomes “humorous”).

When adding a suffix to a word ending in “fer,” one should say the word aloud after adding the suffix. If the –fer still sounds stressed, the r should be doubled (e.g., preferred). If the –fer isn’t stressed anymore, it should be left as a single r (e.g., preferable).

Teachers should also tell children about comparatives and superlatives and the way they’re formed using suffixes (e.g., small, smaller, and smallest).

When children become able to understand the meaning of different suffixes, they look at words with those suffixes and try to comprehend how the meaning is incorporated into these words. It helps to broaden their vocabulary that they can incorporate into their writing. It also helps them learn the spelling of new words.

Vowels: Everything You Need to Know

Vowels are these typical letters:  a, e, i, o, u. Less commonly, it includes words like y (as in ‘my’) and w (as in ‘drew’). While vowels can be short or long, they can also make unclear sounds such as oo.

While the above letters are defined as vowels, in English, there’re many more vowel sounds than these. Consider, for example, the word pairs cook and kook, or cat and car. In each pair, the vowel sounds are different from each other, but they’re represented by the same letters. English has at least fourteen vowel sounds depending on the dialect and diphthongs. In English, the most common vowel sound schwa doesn’t even possess its letter in the alphabet. However, it does have a symbol, and it looks like ǝ. In an unstressed syllable, it’s the “uh” sound that shows up almost everywhere, from antic[ǝ]p[ǝ]tory, to p[ǝ]tato, to th[ǝ]. Apart from pure vowel sounds, there’re diphthongs, where the sound moves from one vowel to another. For example, in the American pronunciation of no, the vowel is a diphthong, where the sound starts at o and goes to u.

All vowels have two pronunciations: a short sound and a long sound. While there’re rules for vowel pronunciation, many times they don’t work. Therefore, the most effective way to learn vowel sounds is to practice and memorize them. It can be hard for students to memorize rules and pronunciations, but there’re some fun ways to do this. Choosing vowel-focused tongue twisters and saying them aloud is an effective way to master vowel sounds. Students should say them quite slowly at first and focus on the correct pronunciations of the vowels. As they get more comfortable, they need to say the tongue twister faster. Reading the dictionary is another useful method to learn vowel sounds.

When looking up new words in an online dictionary, students need to try to say a word aloud first, pronouncing as well as they can. Then they need to listen to the word’s dictionary pronunciation, say it together with the audio, and lastly say it aloud on their own. Some online dictionaries, such as the Cambridge English Dictionary, have a different audio button for British and American English, so students can hear a word in both accents. Another valuable feature of any dictionary (online or physical book) is the pronunciation guide. This guide demonstrates how to pronounce any word in that dictionary.

Word Families: Everything You Need to Know

These are those specific words spelled similarly, which also rhyme. While they have different initial letters, they possess the same “rime” portions. A common word, ‘family,’ is one that ends with “op,” e.g., mop, pop, drop, crop. These words usually share a common root or base word, to which various prefixes and suffixes are added.

Knowledge of word families helps students build vocabulary. Instead of memorizing meanings and spellings of all words, they learn how to recognize patterns, identify root words, and comprehend their common sounds or meanings. This helps in word recognition, resulting in the development of their reading fluency. Studies suggest that kids learn to connect what they’ve already learned to what they’re currently learning by observing word similarities. Comprehending the concept of root words and their derivatives can help kids work out the meaning of other words in a word family. For instance, knowing that the prefix “un” can specify negation, kids can deduce the meaning of words with it, as long as they understand the root word. They’ll understand that “untrue” means “not true” and that “unhappy” is the opposite of “happy.” Similarly, knowing that the suffix “er” can specify more of something, they’ll be able to infer that “happier” means “more happy” and “easier” means “more easy.”

The two-word families that are widely used in reading instruction for beginning readers include rhyming word family and morphological word family.

Rhyming word family: Words that have a similar ending sound belong to a rhyming word family. For instance, the words “bake,” “cake,” and “make” end with a similar combination of words, which also sound similar.

Morphological word family: Words that share a common meaning and structure belong to a morphological word family. For instance, the words “read,” “reader,” “reading,” and “misread” share the common root word “read,” to which different prefixes and suffixes are added.

Encouraging kids to recognize rhyming words in a text is central to teaching them about rhyming word families. Word family games and charts can be effective tools in this effort. For emergent readers, it might not be easy to recognize rhyming words. In such cases, teachers can help them by giving special importance to the similar-sounding areas of final syllables in words. For instance, the teacher can choose a keyword like “cat” and ask the kids to identify words that end with “at.” For morphological word families, classroom instruction needs to focus on building the students’ awareness of morphemes, which refer to the smallest meaningful units of a language.

Word Study: Everything You Need to Know

This is used to refer to the critical investigation of word patterns in the English language. Instead of teaching children phonics using independent rules, word study encourages the in-depth investigation of closely spelled words. This way, the child knows to look for general rules that apply to this group of words, which are spelled in the same way.

A good example would be engaging in a word study of why words like love, have, and give don’t have long vowels. By studying these words in a group, the child knows how to identify words that obey the same rules.

Word study has two key objectives: to help students achieve reading fluency with a strong vocabulary and to give them the opportunity to fully manipulate and explore words. It’s important to understand that word study is about comprehending spelling patterns and not about memorizing spelling words.

Students need to have the ability to properly recognize words to become fully literate. They also need to be able to adequately use written words to communicate meaning. As word study is based on phonics vocabulary and spelling, it’s a way for learners to fully examine and manipulate words. Learning phonics, spelling patterns, word meanings, sight words, and decoding leads to comprehending the basics of written words. It helps students construct and communicate meaning.

Educators have come to realize that rote practice and drill isn’t the most effective way to master a reading/writing skill. Learners need the opportunity to think critically and manipulate words along with their concepts. This enables them to generalize words based on spelling and other commonalities. Comprehending word recognition, spelling, and having a strong vocabulary go beyond memorizing some rules. The most useful way to become proficient in words and their characteristics is to have lots of opportunities to explore them in different contexts.

Teachers can choose from a broad range of word study activities to help students improve vocabulary, word recognition, and spelling. Pattern sorting is an effective word study activity that teaches learners to categorize words. These categories can be based on how specific sounds are expressed in a word. It helps students understand vowel patterns, silent letters, and contractions. Word study lessons involving proofreading can help students develop an eye for how written words should look. Word search is another useful word study activity. Here, students take some word categories and search for examples of words in these categories by combing through textbooks, books, or newspapers.

Accuracy (word): Everything You Need to Know

Refers to the ability to read a word correctly the first time one sees it. It is an important trait for eloquence and full understanding. Accuracy is the most important skill of reading fluency. If a kid is reading a passage quickly, but they are changing or skipping over every other word, they aren’t getting the full meaning and won’t be able to understand what they have read.

Several factors go into increasing accuracy. First and foremost, children must be able to decode and read words quickly. If they cannot quickly decode words, they’ll continue to struggle while reading. They also need to have the ability to quickly read undecodable sight words to improve their accuracy.

When one decodes a word, they use knowledge of the relationships between speech sounds and letters and properly blend them together to form a word. Initially, learners do this in a conscious way. After they’ve decoded a word several times, it becomes a sight word. When kids know many sight words, they’re less likely to be awkward readers.

The rate at which learners read is crucial because slow reading obstructs comprehension. However, reading speed doesn’t suddenly go from slow to fast. For kids who’re learning to read, their speed improves with repeated practice as they develop their reading stamina and orthographic memory. Students can read more quickly when they’re able to quickly break texts into semantic and syntactic phrases and clauses. When teaching fluency to children, it’s better to focus on reading rate instead of speed per se. If the learners think that the main objective is to read as quickly as possible, they might not focus on meaning. The objective is to attain a pace that allows for correct phrasing and acknowledges changes in tone and punctuation but which is adequately quick to enable comprehension.

When students efficiently read words and break the texts into meaningful semantic and syntactic units, they become able to read with expression (known as prosody). For a child to read with prosody, they must possess some understanding of the text as they read it if they know the proper pitch and intonations to use. Similarly, by reading with prosody, the child is more likely to be processing the information as they read it, which results in better comprehension and retention. Additionally, children who demonstrate good prosody in oral reading tend to have better comprehension scores from silent reading.

Automaticity: Everything You Need to Know

Refers to the ability to read a word within a second of looking at it. It is also an important trait for eloquence and full understanding. The student, in whom the basic reading skills haven’t yet become automatic, will read haltingly and with difficulty. The reader is compelled to apply all their concentration to word recognition and, as a result, won’t be able to read with comprehension. Students cannot develop a love of learning if any aspect of learning – thinking, reading, writing, attending, and listening – is arduous. The development of a love of learning requires automaticity in crucial learning and cognitive skills.

Automaticity in reading and learning requires strong phonological awareness, which in turn requires sound language processing skills. If a student can read without having to concentrate or listen without having to strain, they have achieved automaticity. For most kids, listening to teachers and participating in conversations are sufficient to obtain a level of language processing skill that’s automatic. However, for many kids, these opportunities to develop language processing skills, required for automaticity in learning and reading, aren’t enough. For these students, language is anything but automatic. These difficulties often don’t show up in speech but only in learning and/or reading, where the students need a higher level of processing efficiency.

In most cases, by the time a child is an adult, they will get sufficient practice to develop some measures of automaticity. However, this delayed development usually comes too late to alter attitudes to learning and eventual academic outcomes. Therefore, the sooner a kid can develop automaticity, the better. Usually, automaticity is accomplished from learning, repetition, and practice. People develop automaticity through the main process called overlearning. According to this pedagogical concept, newly acquired skills need to be practiced well beyond the stage of initial mastery, which leads to automaticity.

Providing explicit, systematic instruction is an effective way to help students develop automaticity. Teachers also need to encourage students to develop accuracy in all major components of decoding. These components include letter-sound correspondence, blending skills, irregular word recognition, and application of these skills when reading decodable texts. Students shouldn’t be considered proficient readers until they’re able to read accurately and with comprehension. A novice reader might be able to decode a passage, but if their working memory is completely devoted to decoding, they won’t be able to extract meaning from it. Therefore, teachers must give students multiple opportunities to apply their decoding skills to reading decodable text and exhibit comprehension.