Uncategorized

How to Implement the Paired Reading Teaching Strategy in Your Classroom

In this fluency method, learners read aloud to each other. When utilizing partners, more fluent readers can be paired with less fluent readers, or learners who read at the same level can be matched to reread a story they have already read.

Learning Outcomes

  • Speed
  • Accuracy
  • Expression
  • Comprehension

Implementation

  1. Introduce learners to the paired readingmethod. This entails establishing a routine for learners to adopt so that they know the step-by-step requirements for engaging in paired reading. Will they take turns with each person reading a paragraph? A page? Or will one person read while the other person listens?
  2. Teach an error-correction strategy that students can use when supporting each other’s reading (i.e., rereading misread words; signals for difficulty). Model the implementation to ensure that learners understand how to use the method.
  3. Ask learners to begin reading in pairs and adjust reading speed if they are reading simultaneously, so they stay together. Have learners offer feedback and praise frequently for correct reading.
  4. Monitor and support learners as they work.

How to Implement the Phrase Boundaries Teaching Strategy in Your Classroom

Phrase-cued texts are a means to train learners to recognize the natural pause that occurs between phrases in their reading. Because phrases are units that often encapsulate vital ideas, the learner’s ability to identify them can enhance comprehension of the content.

Learning Outcome

  • Speed
  • Accuracy
  • Expression
  • Comprehension

Implementation

  1. Choose a brief (100- to 250-word) passage that is within the learner’s instructional or independent reading level.
  2. Denote the sentence boundaries (ending punctuation) of the passage with double slashes (//).
  3. Mark within-sentence phrase-breaks with naturally occurring pause points that are contained in the sentences. Mark each of these phrase breaks with a single slash mark (/). See example below: My grandfather did great things. // Henry lived during World War II / but he did not fight in it. // He competed in fencing for fun / and played basketball / on the best college team in his state/ and went to France / to take harp lessons / from a famous harpist there. //
  4. Demonstrate fluent reading of the section, overemphasizing the phase breaks the first time.
  5. Encourage the class to read with you a few times chorally. With each choral reading, lower the phrase breaks to a natural reading rate.

How to Implement the Two in One Teaching Strategy in Your Classroom

Composing a sentence for each new vocabulary work is a time-honored, learning activity. With a small twist, it can be turned into a compelling review. Ask learners to put two (or more) words into each sentence.

Learning Outcome

  • Review word meanings

Implementation

Present learners with a list and ask them to make up sentences that include multiple words from the list. It is helpful to allow learners to change the word forms, utilizing, for instance, glancing or glanced instead of a glance. To increase the amount of thinking as well as conversational use of the terms, ask learners to work in small groups or pairs. After five minutes of writing, each group reads their sentence to the class. The instructor should circulate while the learners work and help them refine their sentences.

This simple learning activity has many instructional advantages. By utilizing two words in one sentence, learners form conceptual connections between them. Allowing learners to use different forms of a word helps them practice using base words and their derivatives.

How to Implement the Selective Highlighting Teaching Strategy in Your Classroom

Selective highlighting/underlining is used to help learners organize what they have read by selecting what is essential. This method teaches learners to highlight/underline ONLY the keywords, phrases, vocabulary, and ideas that are central to comprehending the content.

Learning Outcomes

  • Active reading
  • Identify important content
  • Taking notes
  • Making connections
  • Recalling information for later use

Implementation

  1. Introduce learners to the selective highlighting method and discuss the goal of the activity. Then model the implementation to ensure that learners understand how to utilize selective highlighting. Learners must:
  2. Read through the selection.
  3. Reread and start to highlight main ideas.
  4. Highlight the facts, which are essential vocabulary, not the whole sentence.
  5. After highlighting, look at what they have highlighted and summarize what they read.
  6. Take what was highlighted and write a paragraph summarizing what they have read.
  7. Have learners summarize what they read by utilizing the highlighted content to write a summary paragraph.

Considerations

  • Give learners time and means to practice the technique and reinforce successful performance.
    • Monitor and support learners as they work.
    • Instructors may have learners utilize various colors of highlighters to identify main ideas from details.
    • When using an eBook, instructors must ask learners to:
  • Read through the selection first.
  • Reread and select a portion of the content that the learner wishes to highlight by highlighting or changing the font of the content or utilizing content boxes for comments.
  • From the menu, select the “add content-box” option.
  • Type in comments into the content box and click anywhere outside the content box to finish.

How to Implement the Trouble Slips Teaching Strategy in Your Classroom

Learners make notes on pieces of paper, highlighting words, phrases, and passages that are giving them the hardest time. These slips can provide discussion topics for the following day as learners ask each other for clarification on their trouble spots.

Learning Outcome

  • Monitor comprehension

Implementation

  1. In this learning activity, learners are given slips of paper, roughly the size of bookmarks.
  2. As learners read, they should take note of their trouble spots in the content or places where comprehension begins to falter.
  3. After reading the content, learners are placed in groups and asked to share their trouble spots with their peers.
  4. In their groups, they try to work through the confusion.

Considerations

  • This teaches learners that confusion is typical.
  • Through discussions with peers, learners are often able to deal with their confusion without the assistance of the instructor.

How to Implement the Conversation Competition Teaching Strategy in Your Classroom

Pairs of learners compete to see which learner can use the most words from the vocabulary list during a timed conversation.

Learning Outcome

  • Review word meanings

Implementation

Assign each learner a partner. When the instructor says go, the learners stand up and have a specific amount of time to talk with their partners on any appropriate subject; however, they must utilize at least 10 of the target vocabulary in their conversation and check them off as they use them. When they’ve used all 10, they sit down.

The instructor must circulate the classroom during the game to engage learners in conversation and keep them on task. The first learners to finish wins a prize, but only if they share their discussion with the class and use the words correctly.

Considerations

After the game, you may ask multiple learner groups who had robust, vocabulary-rich discussions to share their conversation with the class.

If learners have been sitting for a long time prior to the start of the game, you can encourage the partner groups to walk around the room together while they talk.

Make sure that learners are not utilizing words to discuss inappropriate matters or insult each other.

Some learners may benefit from a shorter list of words or assigning specific topics to discuss.

How to Implement the Flashlight Vocabulary Teaching Strategy in Your Classroom

While learners work in teams, the instructor reads the advantages and disadvantages of each term to shine a “flashlight” on the matching word posted around the classroom.

Learning Outcome

  • Review word meanings

Implementation

  1. Write each vocabulary word on a separate piece of construction paper and place them around the room.
  2. Review the definitions with the class quickly.
  3. Divide the class into groups of three to four.
  4. Read aloud the definitions of one of the words (all flashlights are off at this point).
  5. Each group decides which of the words is accurate.
  6. The instructor says, “Aim,” and the learner holding the flashlight in the groups aims it at the word they have chosen without turning on the flashlight.
  7. Then the instructor says, “Shine.” At this point, the learner turns on the flashlight.
  8. Points are given to groups who shine on the right answer.

How to Implement the Kick Me Teaching Strategy in Your Classroom

In place of a “kick me” sign on their backs, learners have a vocabulary word (on a Post-it note, sticker, or taped scrap paper). Learners roam the room to find the terms that best suited words, such as analogies, descriptions, synonyms/antonyms, etc. The #1 rule of Kick Me is no kicking.

Learning Outcome

  • Review word meanings

Implementation

  1. Print vocabulary words on stickers, pieces of paper, or sticky notes so that you can place one word on each learner’s back. If you have more learners than words, simply make multiple cards with the same word.
  2. Place words on learners’ backs. Tell them not to disclose the term placed on another classmate.
  3. Instruct learners to pair up with a partner and begin asking qualifying questions to figure out the word that is on their own back. Questions such as, “Am I a person?” “Am I a shape?” The only time a learner may ask, “Is my word                 ?” is their final question.
  4. Once each learner has correctly guessed the term on their own back, they may return to their seats.

Modification

Another variation would be to have learners identify the partner that would best be associated with the word they have been given. For instance, they could be asked to find the synonym/antonym to their word or to group according to a central theme, e.g., Union vs. Confederacy. Other modifications include having learners search for missing words to an equation/analogy with all of the correct answers being placed on learners’ backs.

Considerations

  • There is no kicking.
  • Every learner must participate.
  • When the timer stops, everyone must stop working.
  • Phones or computer devices are not allowed.

How to Implement the Anything Goes Teaching Strategy in Your Classroom

Pointing to a word on a list or word wall, the instructor asks learners rapid-fire questions about the terms.

Learning Outcome

  • Review word meanings

Implementation

This quick review of words moves learners from hesitation to rapid use. The instructor presents learners with a list of words (board, overhead, or word wall). The instructor or learner points to a word and asks a learner one of the following questions:

  • What part of speech is____?
  • What is the definition of _____?
  • Give a synonym and antonym for _____.
  • Spell _____.
  • Use ______ in a sentence.
  • Use____and______in a complete sentence.
  • What relationship do____and____share?
  • Find two terms that are related to _____.

If a learner answers incorrectly, They must be allowed to ask a classmate for help. Continue randomly pointing to a word and asking one of the above questions. Utilizing a rapid-fire pace, instructors can review a long vocabulary list in five or six minutes.

How to Implement the Circle Rotation Teaching Strategy in Your Classroom

Standing in concentric circles, learners face each other and take turns asking questions about the assigned vocabulary.

Learning Outcome

  • Review word meanings

Implementation

  1. Each learner will need a list of the assigned vocabulary and a pen or pencil.
  2. Separate the class into two groups and allow them to form an inner and outer circle, with the learners facing each other.
  3. For the first 15 seconds, each learner in the inner circle asks a prepared vocabulary question (see sample questions below) of the learner she is facing. If the outer-circle learner answers correctly, the inner-circle learner initials his/her word list.
  4. For the next 15 seconds, the outer-circle learner asks the inner-circle learner a question, and initials his/her sheet if she answers correctly.
  5. Then learners rotate to the right and repeat the process with the new learners they face.
  6. The group that has the most signatures at the end of the game wins.

Considerations

  1. Demonstrate different types of vocabulary questions.
  2. If there is an odd number of learners, make one learner the “supervisor” who walks around the circle to keep other learners on task.
  3. Some learners will benefit from extra time to prepare questions ahead of time.
  4. Learners can utilize the same questions multiple times.
  5. Some learners may also benefit from an extended question-and-answer time (e.g., 30 seconds or a minute).